Drum Storage. CDB Ltd Storage Solutions

Drum Storage Units - 8 - 20 Drums

From £4,859.40 incl VAT

Ground Clearance: 150mm
Fork Centres: 760mm
Heavy duty Drum Storage units of fully welded construction
Safe storage for 8, 10, 16 or 20 standard 210 litre drums, either palletised or loose loaded
Heavy duty frame is rated at 3 tonnes distributed load over a 3 metre bay
The 8 and 10 drum units are single tier and the 16 and 20 drum units are double tier
Swaged and re-inforced robust sheet steel walls on 3 sides
The sump units can be removed for steam cleaning and have removable galvanised grid floor panels
Fork guides ensure safe and secure movement
Finish: Stove enamel Blue
N.B. A Forklift will be needed to unload these units
Comply to Control of Pollution (Oil Storage) (England) Regulations 2001

From £2,624.04 incl VAT

For use outside or where security is of importance. Doors have high & low level venting. 1 drum units are fitted with one door and 2 and 4 drum units have 2 doors, all with 3 point locking
Vertical drum stores are fitted with galvanised grid floors & horizontal drum units have an open topped sump
N.B. A Fork Lift will be needed to unload these units

£8,342.46 incl VAT

For use outside or where security is of importance, doors have high & low venting - with 3 point locking
Drums are set back to allow space to dispense liquids
6 drums stored
N.B. A Forklift will be needed to unload this unit

£10,392.96 incl VAT

Call for pricing

20 year structural guarantee
Base is manufactured from 3mm mild steel with RHS cross members & pressed ribs
Corner posts, shelf frames & main rails are rolled hollow section
The roof is pressed with suitable bracing & fully welded around the perimeter, while the back,
side & door panels are pressed from 2mm mild steel sheet & corrugated where required
Fitted with crane lifting points (maximum 2000kg per lift point) & sliding doors
The floor area above the sump is covered with galvanised steel channel sections so that
loose drums or pallets can be stored directly onto it, whilst the upper shelf is an open box section
which is designed to support pallets. Grid mesh shelving is available - please call for details
Shot blasted before being painted (RAL 6029) for greater durability
Other colours are available - please call for details
EDRIB9624 - push back system above the sump, allowing the units to be pushed to the back of the units

From £232.86 incl VAT

Fully welded tubular steel construction.
DH443Z: with nylon top rollers to allow drainage from the side bung
DH442S & DH445S: mobile on 2 x 100mm fixed wheels & 2 x 75mm swivel castors
DH445S: as per DH442S but with nylon top rollers to allow drainage from the side bung.

Call for pricing

Comply to Oil Storage Regulations (England) 2001
Fully welded galvanised steel construction with removable galvanised grid for ease of cleaning
Complete with 150mm wide fork hoops which are used to move the unit and keep the sump off the ground

Call for pricing

Comply to Oil Storage Regulations (England) 2001
Medium density polyethylene spill pallet with a 0.6mm galvanised steel powder coated cover with hinged doors
Hinged doors have retaining catches to hold them open & are lockable