Hazardous Storage. CDB Ltd Storage Solutions

Heavy Duty Storage Units - General

From £723.36 incl VAT

A robustly constructed range of cabinets providing safe storage for Flammable Liquids
Manufactured from 1.2mm sheet steel for extra strength and improved protection from fire penetration
Designed and manufactured to meet Fire Classification A2-s2 d0 to EN13501-1:2018
All formed welded seams. Doors are fitted with vertical reinforcement panels to prevent distortion
Finished in stove enamel grey.
Supplied complete with general purpose labelling.
Produced with return flange around doors and joints to prevent the passage of flame
Fitted with all metal security locks and two keys
Adjustable galvanised shelves to 75 mm centres. Shelves are also reversible which allows them to be used as a tray
Base of each unit is fitted with a large capacity removable sump to contain any spillage
Floor stands are available for the five smallest sizes, raising the units by 450 mm

From £418.56 incl VAT

Manufactured from 0.7mm steel body & 0.9mm steel doors
Reaction to Fire Classification EN 13501-1
"No snag" handles with 2-point locking
Floor chests have a welded integrated sump, angled lid to discourage article placement & a hasp & staple lock – padlock not supplied

Call for pricing

FM & TUV/GS Approved
Easy means of cleaning small parts in solvents
Simply place work on spring loaded, perforated dasher plate, press down, agitate, then release to return dasher to drain position
Plated steel dasher also works as an effective flame arrester to reduce the risk of fire flashback
Hinged cover minimizes evaporation losses & protected rim reduces the possibility of hand injury

From £919.08 incl VAT

Welded all steel structure for extra strength
Seven lever safe lock for high security
New regulation labels enclosed to be fitted by customer to suit regulations
Full length heavy duty hinges with concealed fixings to prevent forced entry
Adjustable spill-retaining galvanised shelves for superior spill management
Powder coated with Germ Guard Active Technology anti-bacterial paint
Integral liquid-tight sump encourages the corrcet handling of spills through the use of absorbents
Reaction to Fire Classification EN 13501-1

Call for pricing

FM Approved
Exceed the requirements of HSG51, 2015 (HSE Storage of Flammable Liquids in Containers, 3rd Edition)
Meets the requirements of HSG140, 2015 (HSE Safe
Use & Handling of Flammable Liquids, 2nd Edition)
10 minute fire tested at up to 1,300°C (independent testing)
Internal temperature during fire test kept below the auto ignition temperature of vast majority of flammable liquids
Can help justify storage of more volume of flammable liquids than HSG51 would normally allow
Fully load tested
Self-closing models have fusible links that close the doors at 74°C
Dual wall construction with insulating air space
Fully welded construction with 1mm steel used throughout
3 point heavy duty stainless bullet self-latching doors – positive door closure without manual rotation to ensure latching
Leak proof integrated sump & 2 air vents with flame arresters built-in
Concealed self-close mechanism – release doors on self-closing models from any open position & the door will shut & latch
Adjustable shelf positions on 76mm centres, each with 156kg UDL rating
Continuous piano hinges on doors
Shelves direct leaks to back & bottom of cabinet
Adjustable levelling feet
Built in grounding connector

From £1,205.16 incl VAT

From £2,909.16 incl VAT

Adjustable vent meets the requirements of both Flammable Storage (vent closed) and Agrochemicals (vent open)
All welded units conforming to the A.P.E.A. Construction requirements
These vaults provide a half hour protection from collapse and the passage of fire
Multi-lockable for high security, and fitted with a lift up action lid assisted by gas struts
Middle shelves pivot on models SSV01Z and SSV02Z to enable larger items to be stored on the base level
Model SSV02Z: Clearance height between the bottom and top shelf is 363mm. Clearance height
between top shelf and lid is 255mm
Model SSV03Z has a central partition and four shelves - the two middle shelves fold away and the two top shelves are made in 3 sections, the back section is fixed in position and the front two sections removable
All models have a liquid-tight base to contain spillage
Please not: A Fork Lift will be needed to unload all these vaults

From £1,260.78 incl VAT

Suitable for 'CLASS A' storage (1986) and labelled in accordance with Petroleum Consolidation Act 1928, conforming to BS5378 & E. C. Directive 92/58 EEC.
All welded unit designed and constructed to comply with A. P. E. A. requirements.
Fitted with a hasp and staple to enable padlocking.Produced with a sloping roof to aid protection against the weather.
To assist in the cleaning of any spillages, each unit is fitted with a removable sump.Fitted with 150 mm deep leak proof sump to contain spillage.