Hazardous Storage. CDB Ltd Storage Solutions

Safety Cabinets for Flammable Substances

Call for pricing

FM Approved
Exceed the requirements of HSG51, 2015 (HSE Storage of Flammable Liquids in Containers, 3rd Edition)
Meets the requirements of HSG140, 2015 (HSE Safe
Use & Handling of Flammable Liquids, 2nd Edition)
10 minute fire tested at up to 1,300°C (independent testing)
Internal temperature during fire test kept below the auto ignition temperature of vast majority of flammable liquids
Can help justify storage of more volume of flammable liquids than HSG51 would normally allow
Fully load tested
Self-closing models have fusible links that close the doors at 74°C
Dual wall construction with insulating air space
Fully welded construction with 1mm steel used throughout
3 point heavy duty stainless bullet self-latching doors – positive door closure without manual rotation to ensure latching
Leak proof integrated sump & 2 air vents with flame arresters built-in
Concealed self-close mechanism – release doors on self-closing models from any open position & the door will shut & latch
Adjustable shelf positions on 76mm centres, each with 156kg UDL rating
Continuous piano hinges on doors
Shelves direct leaks to back & bottom of cabinet
Adjustable levelling feet
Built in grounding connector

From £2,909.16 incl VAT

Adjustable vent meets the requirements of both Flammable Storage (vent closed) and Agrochemicals (vent open)
All welded units conforming to the A.P.E.A. Construction requirements
These vaults provide a half hour protection from collapse and the passage of fire
Multi-lockable for high security, and fitted with a lift up action lid assisted by gas struts
Middle shelves pivot on models SSV01Z and SSV02Z to enable larger items to be stored on the base level
Model SSV02Z: Clearance height between the bottom and top shelf is 363mm. Clearance height
between top shelf and lid is 255mm
Model SSV03Z has a central partition and four shelves - the two middle shelves fold away and the two top shelves are made in 3 sections, the back section is fixed in position and the front two sections removable
All models have a liquid-tight base to contain spillage
Please not: A Fork Lift will be needed to unload all these vaults

From £1,260.78 incl VAT

Suitable for 'CLASS A' storage (1986) and labelled in accordance with Petroleum Consolidation Act 1928, conforming to BS5378 & E. C. Directive 92/58 EEC.
All welded unit designed and constructed to comply with A. P. E. A. requirements.
Fitted with a hasp and staple to enable padlocking.Produced with a sloping roof to aid protection against the weather.
To assist in the cleaning of any spillages, each unit is fitted with a removable sump.Fitted with 150 mm deep leak proof sump to contain spillage.

From £1,221.37 incl VAT

All units have a height of 2230mm
Available Ex-Stock - Ask about our Installation Service
Site Survey, CAD Design and Installation Service Available - please call for details

£1,768.86 incl VAT

No fixing required - Simply secure this unit by using six 600 x 600m paving slabs (not supplied)
Fabricated from robust Heavy Duty Box Section
Complemented by Tri Wall fluted Plastic side panels & Galvanised sheet Steel roof
Can also be used as a Smoking Shelter
Fork Lift needed for offloading

£10,392.96 incl VAT

£10,710.24 incl VAT

Call for pricing

Side & roof panels are manufactured from 0.6mm cold rolled corrugated galvanised steel & for additional strength the unit has a structural frame which is fitted at each end & at the centre of the unit
The sump is manufactured from 2mm structural grade galvanised steel & is fitted with base plinths to keep the underside of the units out of contact with the ground
The double doors, fitted with 3 upper & 3 lower vents in each door, are located on one of the short sides of the unit & are secured with a Kale mortis lock with cylinder (152R)
Complete with two sets of shelves (60kg shelf U.D.L.) on each of the long sides of the unit
Fork lifting pockets are underneath the units